Introduction

This article outlines use of the supported 3.5mm RCA cable to output analogue signal on the H200 device.

• Official Amino 3.5mm cable information
• Technical Specifications

Requirement

Official Amino 3.5mm to 3 RCA Cable

Part Number: 99-970514-00

Description: For Amino STBs with 3.5mm jack socket. Terminates in 3 RCA for CVBS and Audio L/R. 1.8m cable length.

Technical Specification

1. Analog Audio Output

The audio DAC inside S905X4 is used to provide the analogue audio L+R output. The typical output level is in the range of 2Vrms. The output will be routed to the 3.5mm TSSR A/V jack together with analogue video outputs. 

1. Analog Video Output (CVBS)

The S905X4 integrates 1 video DAC using high-speed CMOS DAC technology. The CVBS + Audio L/R signals are routed out on the PCBA to the 3.5mm TSSR A/V jack.

The CVBS output is disabled when HDMI output is connected to TV set. Activated when HDMI output is disconnected.

Pin Assignment of 3.5mm TSSR analogue A/V plug for H200: 

Note: This is not the same as many generic connectors which appear similar so if in doubt, order the official Amino 3.5mm cable product code:  99-970514-00