Introduction

This article will show how to add and set up a Wi-Fi dongle in H200. 

Prerequisites

Own a Tenda AC1300 USB dongle.

Summary

Preparation

To use Wi-Fi on the H200 STB, you will need the following Wi-Fi Dongle.

This is the Wi-Fi Dongle Box

Instructions

For setting up the H200 with the Wi-Fi Dongle:

1. Your H200 STB’s release should be “25.3.2242.1R“ or above. Please upgrade your STB to the target release using Ethernet before using the Wi-Fi Dongle

2. You can find the “25.3.2242.1R“ release on Orchestrate server

3. Enable the INI option key.link.blue="pkg://com.android.tv.settings?cls=com.android.tv.settings.MainSettings"

4. Plug in the Wi-Fi Dongle to H200 before or after Power On

   

   H200 with Wi-Fi dongle inserted

    

5. Press the RCU blue button to call out Settings

   

   Settings Page

    

6. Select the “Network & Internet” section

7. Disconnect the Ethernet cable from the H200 if you are using it

8. Enable “Wi-Fi”

9. Choose the AP you want to connect and config the setting

   

For video playback setup information on H200 STB, please refer to H200 Quick Start Guide

References

None