Additional Channel Zapper Lineup option on channel entry to restart or loop on termination condition

Introduction

This page is going to introduce the option in the H200 offline setup's "Channel line-up creator".

When you press Add channel in the "Channel line-up creator", the below page will pop up.

There are 3 option for you to enable/disable.

1. "Automatically play this channel on bootup"

Enabling this on particular channel will make the STB to play this channel after bootup. Please note that only 1 channel can be set.

2. "Re-tune the channel if error is encountered"

Enabling this option means when the STB got error on this channel, it will try to retune to same channel.

Disabling this option means the STB will go to next channel when there is error on current channel.

There is an ini option for this function "webapp.retry_on_error".

True (Default) : Enabled
False: Disabled

Please note that you have to set ini option "player.error_handling_policy" to "default" for this ini to work.

3. "Loop this video (continuous play)"

Enabling this option means the STB will playback from the beginning of the current channel's stream when the playback reach the end.

Disabling this option means the STB will go to next channel when the playback reach the end.

There is an ini option for this function "webapp.loop_on_end".

True: Enabled
False (Default): Diabled