How to check the firmware

Introduction

This page has the objective of describing how to check the firmware currently installed on any Entone STB.

 

Method 1: On the STB shell/console:

1.Run the following command to check the APP installed

cat /tmp/app_identinfo.txt

2.Run the following command to check the BBL installed

cat /tmp/bbl_identinfo.txt

 

Method 2: On the Boot Menu

1) Access Boot Menu;
2) Select "Advanced Setting";
3) Insert the "368663" code;
4) Select "System information";
5) Select "General Information";

 

 

Method 3: On System Boot up

When the STB is booting up, you may see a displayed message with the current firmware, ether the STB is booting from the APP or from the BBL.

 

Have more questions? Submit a request

0 Comments

Article is closed for comments.
Powered by Zendesk