Introduction
The purpose of this article is to guide how to install the Appspace Android app on the H-series media player.
Prerequisites
Own an Amino H-Series media player.
Possess a USB flash drive or micro SD card to be used as device storage preformatted in FAT32.
H-Series firmware must be 25.6.2420.5R or above.
Understand the basic configuration with Amino Orchestrate.
In This Article
Summary
Appspace Installation Process
Orchestrate
To install the Appspace using Amino Orchestrate follow the steps below:
1. Click the "Add Application" button
2. Select the "Appspace" application, press "Add" and then "Save".
Note: If you don't find your preferred Appspace application from the list, please contact Amino to publish it into your domain.
Auto-Launch Appspace on start-up
It is possible to configure an application as the main application which a device will auto-launch when it boots.
To use this feature, the tvapp.package_id parameter must be set with the "Appspace app ID":
1. Press the "Add/Remove Parameters" button then include the "tvapp.package_id" parameter in the list of parameters to be configured and click "Apply".
2. Insert the following ID:
tvapp.package_id=com.appspace.app
Note: All media player devices that are assigned to this group will have the Appspace application remotely installed and it will Auto-Start on bootup.
Prepare external storage
The Amino H-Series requires Appspace to be installed on an external storage.
Please consult the References at the end of this article to learn how to access the USB or micro SD card slot.
Upon the Application's first start, a screen will be displayed requesting to insert an external storage so the installation process can be finalized.
After inserting the external storage the device will automatically detect it and ask to be formatted.
Press "Format Removable Storage" followed by "Format".
The formatting process will start automatically.
After the formatting process is complete the Appspace application will be moved automatically to the external storage and auto-launch.
You are now ready to use Appspace with the H-Series.
References
Preparing the H-series to be used with external storage